Spin, Pitch, Push: Deconstructing Disc Golf Putting Terms

I shared a key component to accurate and consistent putting in a recent post. The title of the post, The Straight Line on Disc Golf Putting, Part 1, provides a pretty big hint to the nature of the tip. It also indicates that I intended to add at least one more complimentary post, and I do. But comments on social media convinced me to write this one first.

Part of the post was an explanation of why the ‘straight line’ approach to disc golf putting works regardless of a player’s preferred putting style. Push putt, spin putt, pitch putt, I wrote- it doesn’t matter. I also included a very brief explanation of those terms for readers unfamiliar with them, and those definitions became the focus of most of the feedback I received.

I decided to dig a little deeper into what others have said and written about pitch, spin, and push as descriptors used to explain putting techniques in disc golf. One thing became clear (or, rather, unclear): because there is no ultimate authority on disc golf terminology they mean different things to different people. Rather than cite a variety of conflicting explanations, I’ve decided to simply explain what they mean to me, and why.

Before I go into each of the three terms, I’ll start by listing three key points:

  1. Each player’s standard putting technique is unique to that player.
  2. The three terms defined below are not putting techniques or putting ‘styles.’ They are components that can be and usually are combined to one degree or another.
  3. Most players have a standard putting form for routine putts (defining ‘routine’ as inside the circle, relatively flat and not obscured) and therefore a standard mix of two or three of the 3 components. But non-routine putts call for the components to be mixed in different proportions.

Not only does each player’s putt feature its own unique blend of mechanical components. That blend can and does change from putt to putt depending on the situation. It’s a fluid thing. Keep that in mind as you read the definitions below.

Push Putt

This term is used to describe a player propelling a disc forward in a straight line at the target from a spot close to the torso (anywhere from waist to sternum). A couple similar movements used in other sports would be the thrust in fencing and the jab in boxing. Paul McBeth provides a good example in this video by Jomez Productions. Go to the 5:57 mark, and note how the motion of the disc is all straight forward- no arc, no sideways movement, even at the end.

PITCH PUTT

The pitch putt may be so named because of its similarity to the motion used when ‘pitching’ horseshoes. Like the push putt, an accurate and consistent pitch putt requires the player to keep the disc on a straight line from beginning to end (release and follow-through). Unlike the push putt, the player typically starts the putt at knee-height or even lower and often maintains a straight arm and locked elbow throughout. Because of the low starting point the trajectory of a pitch putt is also almost always steeper (low to high) than a push putt, which especially for power putters can be almost flat.

“Pitching horseshoes,” photo courtesy of Missoulan.com.

SPIN PUTT

The term ‘spin putt’ is probably the least accurately descriptive of the three. Spin, after all, is a critical element of any putting technique except the rarely seen end-over-end ‘flip’ putt. A more accurate label for the technique known as the spin putt would be ‘fling putt’ or ‘flip putt.’ There are two things that differentiate this putting method from the two listed above:

  1. The putt finishes with a rotational flipping motion, similar to that uses to ‘toss’ a Frisbee. Original Frisbees used to come with the slogan “Flip flat flies straight.
  2. Unlike the push and pitch putts, most or all of the power/thrust of a pure spin putt comes from this flipping motion. “It’s all in the wrist,” as they say, and in this case it’s true.

This gets back to the reason I wrote the post The Straight Line on Disc Golf Putting, Part 1, in the first place. The wrist flick that defines so-call ‘spin putting’ is the easiest way to generate power while facing the basket. It is the most difficult, however, when it comes to achieving a reliable, consistent release point.

Nate Doss prepares to execute his signature eye-level spin putt. Photo courtesy of AllThingsDiscGolf

Sure, some top pros have have had success with it (Nate Doss and Steve Rico come to mind). but they are the exception to the rule. Why? Because when the wrist-flip supplies most of the power, the motion of the disc leading up to the release point follows an arc rather than a straight line.

To see what I mean, check out this very recent clip from Jomez Productions’ coverage of Simon Lizotte at the 2019 Pro Worlds. Go to the 32:00 mark, and watch the slo-mo replay of Simon’s spin putt. He finishes by following through straight at the target after the disc is out of his hand, but the motion leading up to the release is clearly more of a rotational wrist-flicking nature.

Now go back and watch the Paul McBeth clip linked above and you’ll see the putting motion and the exaggerated follow through both staying on the same line directly at the target. The disc can’t help but following that straight line, and this isn’t a given with a spin (AKA fling AKA flip) putt.

I know, sticking to this straight line while also generating sufficient spin is tricky. I’ll address how to do just that in the next post, Part 2 of The Straight Line on Disc Golf Putting. Stay tuned!

Add to the discussion- leave a reply!

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s